Place the pallet without a spotter

Top-beam stacking is done blind. The operator cannot see the fork tips at nine metres, the pallet slots are a guess, and a missed entry damages both the load and the rack. This system puts the fork tips on the screen and draws the alignment lines for the operator.

Built-in AI detects the pallet and provides visual alignment guidance: during fork movement, preset reference and calibration lines help line the forks up with the slots, so the placement is made once rather than adjusted three times. Laser positioning with intelligent lighting follows the fork movement, and the same AI detects pedestrians and vehicles around the truck.

Nothing is drilled and nothing is routed through the mast. The cameras are compact, magnetically mounted and wirelessly powered, so a camera can be repositioned or moved to another truck in minutes — which is what makes this specification practical for rental fleets and for trucks that only occasionally handle high-rack work.

Transmission uses FHSS to hold a stable picture across a large building: up to 120 m from the fork camera and up to 300 m from other wireless cameras in open areas. The monitor records all four channels on a loop, records on alarm, and plays back locally from a Micro SD card of up to 128 GB, with supercapacitor power-loss protection so footage survives an unexpected power cut.

The monitor is rated IP66 and the camera IP69K with 5.9 G vibration resistance to ISO 16750-3:2012, so the kit works outdoors, in the yard and through washdown, not only in a clean aisle.

• Built-in AI: pallet detection, laser positioning, intelligent laser lighting, pedestrian and vehicle detection
• Magnetic camera housing with wireless power — no drilling, no cable runs
• FHSS wireless: 120 m fork camera, up to 300 m other wireless cameras
• 4-channel loop recording, alarm-triggered recording and local playback
• Micro SD storage up to 128 GB with supercapacitor power-loss protection
• Quad-view AI monitor, IP66, built-in antenna
• Camera IP69K, 5.9 G vibration resistance (ISO 16750-3:2012)
• Repositioned or moved between trucks in minutes
• Optional 4G and GPS for live remote viewing on a management platform

Specification

Supplied equipment

Check the delivery against this list on arrival. The kit below is the standard two-camera configuration; camera count and the 4G option are set per truck at quotation.

10.1-inch wireless monitor

HD 2.4 GHz digital quad-view, weatherproof IP66, built-in antenna, AI on board

×1

Wireless AI camera

HD digital wireless camera with built-in battery and magnetic mount

×2

DC converter

Input DC 24–48 V, output DC 12 V / 1.5 A

×1

AC adapter

Mains charger for the camera batteries

×2